Skip to Main Content
This paper describes burst-mode receiver ICs with quick response for 1.25-Gb/s optical access networks. In a point-to-multipoint fiber access system, such as a passive optical network (PON) system, the receiver should be able to handle burst-data packets with different amplitudes. In burst-mode transmission, a receiver with a quick response is desired for high efficiency in data transmission. In addition, high sensitivity is also required for such a shared access system. To achieve a quick response and high sensitivity at the same time, a transimpedance amplifier (TIA) with three gain modes has been designed. The use of a hysteresis comparator enables fast gain mode switching. A limiting amplifier with feed-forward auto-offset compensation (AOC) is also used for quick response to burst data. These circuit techniques require no external adjustment. Using these design techniques, optical receiver ICs were fabricated in SiGe-BiCMOS technology. The optical receiver built with the ICs exhibits a settling time of under 20 bits and a sensitivity of -30 dBm with wide dynamic range of over 26 dB using a p-i-n photodiode (PD) for burst-mode optical input at 1.25 Gb/s. These fast-response receiver chips improve the data transmission efficiency. The use of a conventional p-i-n PD and the freedom from external adjustment make it possible to build an inexpensive receiver.
Date of Publication: Dec. 2005