Skip to Main Content
This paper presents a novel topology for the even harmonic mixer (EHM). The proposed mixer employs a current reuse circuit in the RF input stage to improve its linearity, and uses the double frequency technique in the LO input stage to overcome the leakage and dc offset problems for heterodyne and direct conversion receivers, respectively. In addition, the proposed topology also has the advantages of low power consumption and high conversion gain. In order to demonstrate the benefits of the proposed mixer, theoretical analyses of linearity, conversion gain, and noise performance have been described in detail. The measured results reveal that the proposed mixer has a single-end conversion gain of 9.17 dB, third-order input intercept point (IIP3) of -5.01 dBm, and IIP3/dc of -6.31 dB, under the supply voltage of 1.8 V, power consumption of 1.35 mW, and LO power of 5 dBm at 900 MHz.
Circuits and Systems I: Regular Papers, IEEE Transactions on (Volume:52 , Issue: 9 )
Date of Publication: Sept. 2005