Skip to Main Content
In general case of DC reactor type superconducting fault current limiter (SFCL), a fault current gradually increases during the fault. It takes above 5 cycles to cut off the fault in the existing power system installed the conventional circuit breakers (CBs). Therefore, the fault current increases during the fault even if the SFCL is installed. This paper proposes a technique for decaying the fault current with the function of the fault detection and control of power converter of the SFCL. Using the proposed method, the fault current can decay after 1-2 cycles when the fault occurs. To analyze this technique, three-phase 6.6 kV/200 A SFCL was fabricated. The SFCL has just one DC reactor, an AC to DC power converter which has thyristors as the rectifying device, and a three-phase transformer, which is called magnetic core reactor (MCR). The short-circuit tests of this SFCL were performed successfully. Comparing the result using the proposed technique with the typical result, the fault current is decreased effectively by the proposed technique. This result shows that this SFCL using the fault detection and control of power converter can be applied to the existing power system which has conventional CBs.