Skip to Main Content
We investigated standard specimens for accurately calibrating the line-focus-beam ultrasonic material characterization (LFB-UMC) system without system dependencies. We evaluated several types of lithium tantalate (LiTaO/sub 3/) substrates using two LFB-UMC systems with different device/system characteristics to measure and calibrate the propagation characteristics of the leaky surface acoustic waves (LSAWs), and analyzed the variations between the calibrated results. We concluded from this analysis that, by selecting materials with the cut surfaces and propagation directions of standard specimens that are identical to the objects to be calibrated, calibration errors resulting from different performance characteristics between the two systems could be nearly eliminated. Also, analytical errors caused by the effects of spectra with two close peaks (another propagation wave mode), one of the most common problems of characterization in the past, could be eliminated at the same time by this method.
Ultrasonics, Ferroelectrics and Frequency Control, IEEE Transactions on (Volume:51 , Issue: 6 )
Date of Publication: June 2004