Optimizing position readout circuits in positron emission tomography front-end electronics

Most of the front-end position readout circuits in positron emission tomography (PET) detectors originate from the Anger logic design. In PET detectors with position-sensitive photomultiplier tubes (PS-PMTs) and multi-channel photomultiplier tubes (MC-PMTs), anode position readout circuits are more complex due to multi-anode outputs from a single PMT. To simplify the circuits, many researches have investigated different schemes by combining multiple PMTs with simplified X/sup -/, X/sup +/, Y/sup -/, Y/sup +/ outputs. In this paper, we aim at optimizing the performance of the position readout electronic circuits. First, we compared the signal-to-noise ratios (SNRs) in different position readout schemes. Then we examined the truncation and roundoff errors in the irradiation-image processes by applying the root-sum-square (RSS) analysis and the uniform distribution simulation methods. Furthermore, we investigated the gain adjustment and balance issues in the X/sup -/, X/sup +/, Y/sup -/, Y/sup +/ analog signal channels. We demonstrated that an eight-bit analog to digital converter (ADC) is probably insufficient in the position recording if a gamma-ray event position is calculated from digitized X/sup -/, X/sup +/, Y/sup -/, Y/sup +/ signals. We also revealed that an energy nonuniformity error could be occurred if the signal gains in the front-end analog circuits are improperly adjusted. As a result, the quantitative gain adjustment criteria are given to optimize the PET position readout circuits.