By Topic

Crucial points in perpendicular recording

Sign In

Cookies must be enabled to login.After enabling cookies , please use refresh or reload or ctrl+f5 on the browser for the login options.

Formats Non-Member Member
$31 $13
Learn how you can qualify for the best price for this item!
Become an IEEE Member or Subscribe to
IEEE Xplore for exclusive pricing!
close button

puzzle piece

IEEE membership options for an individual and IEEE Xplore subscriptions for an organization offer the most affordable access to essential journal articles, conference papers, standards, eBooks, and eLearning courses.

Learn more about:

IEEE membership

IEEE Xplore subscriptions

1 Author(s)
Desserre, J. ; BULL Boite Postale, LES CLAYES S/BOIS, France

Since the introduction of perpendicular recording on a floppy disc by IWASAKI in 1977 and its equivalent design on a rigid disc (SPH-like sensor + double-layer medium) in 1981, many tests have been carried out on different R/W sensors. For each test the main goal was the fci record or the improvement of the magnetic layer. Seen from the recording system point of view, the head and the medium are looked at as a unit through a specification, unchanging with increasing area density. For example, a minimum of 26 dB and 70 % must be achieved for the S/N ratio and the resolution respectively. By considering the noise of the best electronic channel (with a thin film head), and ignoring mechanical and medium noises, the output signal must be at least 250 μv pop. For a 50 Kfci application, however, a sensor does not yet exist. Using a ferrite head with a 1.2 μm gap length to write on FeTbGd, the level of the signal will not be high enough to be used. It is improved with a 0.6 μm gap head but then, the field doesn't allow us to write ! Such problems exist also with thin film heads or SPH like sensors on rigid discs. To improve the R/W process, the trend is to use a double layer medium e.g. CrCo/FeNi. The results show that this direction is not necessarily the best. For example, when erasing or over-writing with the head, some domains appear in the FeNi film which create noise from the track or its edge. Another example is the fact that the optimum parameters for a medium such as CrCo are not always compatible with the characteristics of the head (i.e. Hc, the thickness, the crystallographic orientation, the bit stability compared to the write field, the signal, the noise...).

Published in:

Magnetics, IEEE Transactions on  (Volume:20 ,  Issue: 5 )