Skip to Main Content
Some marine seismic data sets exceed 10 Tbytes, and there are seismic surveys planned with a volume of around 120 Tbytes. The need to compress these very large seismic data files is imperative. Nevertheless, seismic data are quite different from the typical images used in image processing and multimedia applications. Some of their major differences are the data dynamic range exceeding 100 dB in theory, very often it is data with extensive oscillatory nature, the x and y directions represent different physical meaning, and there is significant amount of coherent noise which is often present in seismic data. Up to now some of the algorithms used for seismic data compression were based on some form of wavelet or local cosine transform, while using a uniform or quasiuniform quantization scheme and they finally employ a Huffman coding scheme. Using this family of compression algorithms we achieve compression results which are acceptable to geophysicists, only at low to moderate compression ratios. For higher compression ratios or higher decibel quality, significant compression artifacts are introduced in the reconstructed images, even with high-dimensional transforms. The objective of this paper is to achieve higher compression ratio, than achieved with the wavelet/uniform quantization/Huffman coding family of compression schemes, with a comparable level of residual noise. The goal is to achieve above 40 dB in the decompressed seismic data sets. Several established compression algorithms are reviewed, and some new compression algorithms are introduced. All of these compression techniques are applied to a good representation of seismic data sets, and their results are documented in this paper. One of the conclusions is that adaptive multiscale local cosine transform with different windows sizes performs well on all the seismic data sets and outperforms the other methods from the SNR point of view. All the described methods cover wide range of different data sets. Each da- a set will have his own best performed method chosen from this collection. The results were performed on four different seismic data sets. Special emphasis was given to achieve faster processing speed which is another critical issue that is examined in the paper. Some of these algorithms are also suitable for multimedia type compression.