Scheduled System Maintenance:
Some services will be unavailable Sunday, March 29th through Monday, March 30th. We apologize for the inconvenience.
By Topic

Slotless permanent magnet synchronous motor operation without a high resolution rotor angle sensor

Sign In

Cookies must be enabled to login.After enabling cookies , please use refresh or reload or ctrl+f5 on the browser for the login options.

The purchase and pricing options are temporarily unavailable. Please try again later.
2 Author(s)
Batzel, T.D. ; Dept. of Electr. Eng., Pennsylvania State Univ., University Park, PA, USA ; Lee, K.Y.

An implementation for sinusoidal current control of a slotless permanent magnet synchronous motor (PMSM) with discrete Hall sensor position feedback is presented. To estimate the rotor position of the slotless PMSM, a flux estimation technique is used that takes advantage of the slotless machine's characteristically low inductance to limit flux estimation error. The rotor position is estimated using a reference model and the measured phase currents and voltages. At startup and very low speeds, discrete Hall sensors are used to limit the position estimation error to approximately ±30 electrical degrees and to prevent the flux estimators from drifting due to measurement noise and offset. The proposed sinusoidal control method reduces the torque pulsations present when Hall sensor position feedback alone is used and eliminates the need for high-resolution rotor angle sensors. The proposed control strategy is applied to a slotless PMSM drive system and implemented using a digital signal processor (DSP). Experiments are carried out for the system and the results demonstrate the effectiveness of the control

Published in:

Energy Conversion, IEEE Transactions on  (Volume:15 ,  Issue: 4 )