Single-Stage Electronic Ballast Using Class-DE Low-${d} \upsilon/{d}t$ Current-Source-Driven Rectifier for Power-Factor Correction

A single-stage high-power-factor electronic ballast with a Class-DE low-
d
v/
dt
rectifier as a power-factor corrector is proposed in this paper. The power-factor corrector is achieved by using a bridge rectifier that acts as the Class-DE low-
d
v/
dt
rectifier. The Class-DE low-
d
v/
dt
rectifier is driven by a high-frequency current source, which is obtained from the square-wave output voltage of the Class-D parallel resonant inverter through an
LC
-series circuit. By using this topology, the conduction angle of the bridge rectifier diode current is increased, and a low line-current harmonic is obtained. A prototype ballast is implemented to drive a 36-W fluorescent lamp. The switching frequency is fixed at about 84 kHz. Experimental results verify the theoretical analysis. The designed electronic ballast has a power factor of 0.99, a total harmonic distortion of 1.3%, a lamp current crest factor of 1.42, and 90% efficiency at full power.