By Topic

Investigation of the mechanism for Ti/Al ohmic contact on etched n-GaN surfaces

Sign In

Cookies must be enabled to login.After enabling cookies , please use refresh or reload or ctrl+f5 on the browser for the login options.

The purchase and pricing options are temporarily unavailable. Please try again later.
9 Author(s)
Sheu, J.K. ; Department of Electrical Engineering, National Cheng Kung University, Tainan, Taiwan ; Su, Y.K. ; Chi, G.C. ; Jou, M.J.
more authors

Your organization might have access to this article on the publisher's site. To check, click on this link:http://dx.doi.org/+10.1116/1.591267 

In this study, the mechanism for ohmic contact of Ti/Al bilayer formation on as-grown, etched and postetch annealed GaN surfaces were investigated. A nonalloyed Ti/Al ohmic contact to etched GaN surface, with postetch annealing prior to metal deposition, was obtained. The specific contact resistance of 2.3×10-4 Ω cm2 was obtained. The nonalloyed ohmic contact may be attributed to the postetch annealing which generates nitrogen vacancies that result in a heavily n-type surface thereby forming a tunneling junction. On the other hand, the nonalloyed Ti/Al contact on as-grown and as-etched GaN surfaces exhibits non-ohmic behavior. After alloying at 500 °C for 5 min, Ti/Al contacts on as-grown, as-etched and postetched annealing GaN surfaces have specific contact resistances around 9.8×10-5, 1×10-4, and 7.2×10-5 Ω cm2, respectively. Nonalloyed Ti/Al ohmic contacts would be especially useful for fabricating high breakdown, recessed-gate field effect transistors on GaN since the moderate postannealing condition converts only the near surface layer to heavily n type. © 2000 American Vacuum Society.

Published in:

Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures  (Volume:18 ,  Issue: 2 )