Slip Control System for a Deep-Sea Mining Machine

Tracked vehicles capable of locomotion in the deep sea are used for manganese nodule mining. This requires specific technical solutions in various respects. Locomotion in the soft sea bed is one of them. For the Crawler to safely maneuver, an automatic drive mode with slip control of the driving tracks is essential. Based on experimental studies at IKS, University of Siegen, slip control for the NIOT-IKS mining machine has been developed and implemented. The experimental setup for the development of the slip control along with the logic of the automatic driving mode is described. The system is critically discussed and the test results and future work are briefly outlined. Note to Practitioners-The work is carried out as part of the polymetallic nodule mining program of the Government of India. The technique of slip control is a specific requirement for a tracked vehicle used in the deep sea. Slip is common in many vehicles-tracked and otherwise. Examples are steam engines in the early days and ordinary cars while negotiating slush or snow/ice and dozers working in soft soil. While these are manually controlled by drivers who have firsthand knowledge of the environmental conditions, in the case of a mining machine in deep sea, it has to be completely automatic and, hence, is challenging. The knowledge generated in this work could be effectively used by practitioners in other related areas of automobile engineering for updating their expertise. Also, similar techniques may be used for maneuvering vehicles sent to other planets