Scheduled System Maintenance:
On May 6th, system maintenance will take place from 8:00 AM - 12:00 PM ET (12:00 - 16:00 UTC). During this time, there may be intermittent impact on performance. We apologize for the inconvenience.
By Topic

Measurement of the saturation characteristics in the quadrature axis of synchronous machines

Sign In

Cookies must be enabled to login.After enabling cookies , please use refresh or reload or ctrl+f5 on the browser for the login options.

The purchase and pricing options are temporarily unavailable. Please try again later.
2 Author(s)
Kar, N.C. ; Dept. of Electr. & Comput. Eng, Windsor Univ., Ont. ; El-Serafi, A.M.

For the accurate prediction of the performances of saturated synchronous machines, the saturation characteristics in both the direct and quadrature axes are needed. The d-axis saturation characteristic of a synchronous machine can be measured easily by the open-circuit test with the machine excited from its field winding. On the other hand, the q-axis saturation characteristic of a synchronous machine cannot be measured applying a similar easy, simple method and, as a result, these characteristics are usually not experimentally measured and are not available. In this paper, three possible experimental methods for determining the q-axis saturation characteristics of both cylindrical-rotor and salient-pole synchronous machines are presented. The merits and demerits of these experimental methods are discussed from the point of view of their complexity and their accuracy. Comparisons between the measured q-axis saturation characteristics obtained by these experimental methods are made for a cylindrical-rotor machine and two salient-pole machines. Moreover, the various sources of errors, which may affect the accuracy of determining the q-axis saturation characteristics by these methods, are investigated

Published in:

Energy Conversion, IEEE Transactions on  (Volume:21 ,  Issue: 3 )