By Topic

MEMS-based direct methanol fuel cells and their stacks using a common electrolyte sandwiched by reinforced microcolumn electrodes

Sign In

Cookies must be enabled to login.After enabling cookies , please use refresh or reload or ctrl+f5 on the browser for the login options.

The purchase and pricing options are temporarily unavailable. Please try again later.
2 Author(s)
Young Ho Seo ; Dept. of Biosyst., Korea Adv. Inst. of Sci. & Technol., Daejeon, South Korea ; Young-Ho Cho

We present a MEMS-based portable Direct Methanol Fuel Cell (micro-DFMC), featured by a platinum sputtered microcolumn electrode and a built-in fuel chamber containing a limited amount of methanol fuel. Also presented is a micro-DMFC stack structure having a common electrolyte sandwiched by the microcolumn electrodes. Microcolumn electrode (ME16) generates the power density (3.2 times) higher than the planar electrode (PE16). The increased window frame reduces the normalized standard power deviation (standard deviation over the average power). The normalized deviation of 0.11 in ME4 cell has been reduced to 0.01 in ME16 cell due to the increased window frames. The maximum power density of 4-cell stack is 15.7 times higher than that of the single cell. 4-cell stack produces the power capacity of 20.3 mWh/g during 980 min operation at the voltage of 450 mV with the load resistance of 800Ω.

Published in:

Micro Electro Mechanical Systems, 2004. 17th IEEE International Conference on. (MEMS)

Date of Conference: