Standardized evaluation of chemical compositions of LiTaO/sub 3/ single crystals for SAW devices using the LFB ultrasonic material characterization system

The line-focus-beam ultrasonic material characterization (LIFB-UMC) system is applied to compare and evaluate tolerances provided independently for the Curie temperature T/sub C/ and lattice constant /spl alpha/ to evaluate commercial LiTaO/sub 3/ single crystals by measuring the Rayleigh-type leaky surface acoustic wave (LSAW) velocities V/sub LSAW/. The relationships between VLSAW, and T/sub C/ and /spl alpha/ measured by individual manufacturers were obtained experimentally using 42/spl deg/YX-LiTaO/sub 3/ wafers as specimens from three crystal manufacturers. In addition, the relationship between VLSAW and SH-type SAW velocities V/sub SAW/ that are actually used for the SAW device wafers was obtained through calculations, using the chemical composition dependences of the acoustical physical constants for LiTaO/sub 3/ crystals reported previously. The result of a comparison between the T/sub C/ tolerance of /spl plusmn/3/spl deg/C and the /spl alpha/ tolerance of /spl plusmn/0.00002 nm through the common scale of VLSAW or VSAW demonstrated that the /spl alpha/ tolerance is 1.6 times larger than the T/sub C/ tolerance. Furthermore, we performed a standardized comparison of statistical data of T/sub C/ and /spl alpha/ for LiTaO/sub 3/ crystals grown by two manufacturers during 1999 and 2000, using VLSAW. The results clarified the differences of the average chemical compositions and of the chemical composition distributions among the crystal ingots between the two manufacturers. A guideline for the standardized evaluation procedure has been established for the SAW-device wafer specifications by the LFB-UMC system.