A 1.8-V /spl Delta//spl Sigma/ modulator interface for an electret microphone with on-chip reference

The design of a delta-sigma (/spl Delta//spl Sigma/) analog-to-digital converter (ADC) for direct voltage readout of an electret microphone is presented. The ADC is integrated on the same chip with a bandgap voltage reference and is designed to be packaged together with an electret microphone. Having a power consumption of 1.7 mW from a supply voltage of 1.8 V, the circuit is well suited for use in mobile applications. The single-loop, single-bit, fourth-order /spl Delta//spl Sigma/ ADC operates at 64 times oversampling for a signal bandwidth of 11 kHz. The measured dynamic range is 80 dB and the peak signal-to-(noise+distortion) ratio is 62 dB. The harmonic distortion is minimized by using an integrator with an instrumentation amplifier-like input which directly integrates the 125-mV peak single-ended voltage generated by the microphone. A combined continuous-time/switched-capacitor design is used to minimize power consumption.