A Highly Reliable Two-Axis MEMS Relay Demonstrating a Novel Contact Refresh Method

This paper reports on a two-axis actuated microelectromechanical systems (MEMS) relay to realize a unique contact-refresh concept. In comparison with all other conventional MEMS relays utilizing only several designated contact spots during their whole lifetime, the proposed concept can change the real contact spots (asperities) by altering the lateral position of contact asperities, thus providing highly reliable contact endurance. In addition, it can enhance lifetime of the switches that fail by contact resistance increase, and potentially even for switches that fail by contact stiction if the contact position is changed before a critical number of switching cycles is reached; however, the device inevitably has a relatively large device area and additional control circuitry in this stage of development. The fabricated relays showed vertical actuation voltages under 40 V, a switching delay of 190 μs, and a maximum lateral displacement of 10 μm. Owing to the suggested contact-refresh scheme, the total contact endurance in one switching device was dramatically increased, and the sum of dozens of lifetimes measured at the selected lateral positions reached 6 × 10
⁷
cycles at 100 mA in hot switching conditions (Au-to-Au contact), which is nearly 50 times higher than the average value of the measured lifetimes in a designated contact spot.