Novel Technique for Wideband Digital Predistortion of Power Amplifiers With an Under-Sampling ADC

Most conventional wideband digital predistortion (DPD) techniques require the use of a very high-speed analog-to- digital converter (ADC) in the feedback path. This paper proposes a novel technique, termed under-sampling restoration digital predistortion (USR-DPD), to linearize wideband power amplifiers (PAs) with ADCs that operate at sampling rates much lower than required by Nyquist limits for the predistorted band (under-sampling ADCs). The USR processing is implemented in an iterative way to restore full-band PA output information from the under-sampled output signal, allowing memory DPD models to be successfully extracted. The USR-DPD can operate in two modes: without and with a band-limiting filter in the feedback path. In comparison with conventional DPD techniques, the requirement for ADC sampling frequency can be significantly reduced using the USR-DPD approach. Experimental tests were realized for two PAs with numerous signals (10-, 20-, 40-, and 60-MHz long-term evolution signals) using different ADC sampling frequencies. The DPD with the under-sampling ADC could achieve comparable performances to its counterpart with a full-rate ADC, while using 3–5 times lower sampling frequency, and around
$-{\hbox{50-dBc}}$
adjacent channel power ratios were achieved.