Terahertz Photoacoustic Spectroscopy Using an MEMS Cantilever Sensor

In this paper, a microelectromechanical systems cantilever sensor was designed, modeled, and fabricated to measure the photoacoustic (PA) response of gases under very low vacuum conditions. The micromachined devices were fabricated using silicon-on-insulator wafers and then tested in a custom-built, miniature, vacuum chamber during this first-ever demonstration. Terahertz radiation was amplitude modulated to excite the gas under test and perform PA molecular spectroscopy. Experimental data show a predominantly linear response that directly correlates measured cantilever deflection to PA signals. Excellent low pressure (i.e., 2-40 mTorr) methyl cyanide PA spectral data were collected resulting in a system sensitivity of 1.97 × 10
^-5
cm
^-1
and a normalized noise equivalent absorption coefficient of 1.39 × 10
^-9
cm
^-1
W Hz
^-1/2
.