Cold Mass Design of the Superconducting Outsert for the 40-T Hybrid Magnet

A 40-T hybrid magnet is under construction at the High Magnetic Field Laboratory, Hefei Institutes of Physical Science, Chinese Academy of Sciences (CHMFL), Hefei, China. It includes a superconducting outsert magnet that can provide a central field of 11 T and a warm bore of Ø 800 mm for the insertion of a water-cooled magnet. This superconducting magnet has three superconducting coils, all of which are wound with Nb
₃
Sn cable-in-conduit conductors (CICCs). The structural design of the superconducting outsert's cold mass has been worked out starting from the design of the conductors and the configuration of the coils. In this paper, we present the considerations and designs for the major components of the cold mass, i.e., the winding pack, the preload structure, the CICC lead support structures, and the cooling circuit. In addition, the design of the support structure of the coils is introduced and discussed. This is a key element and a special component with the function to support the cold mass and to transfer the fault loads from the coils to the base plate of the cryostat while its heat load to the cryogenic side remains as low as possible.