Inkjet Printed All-Polymer Flexural Plate Wave Sensors

We discuss the fabrication and performance of an all-polymer, flexural plate wave gravimetric sensor using flexible, piezoelectric Polyvinylidene fluoride as the substrate and an inkjet-printed interdigital transducer (IDT) employing conductive poly(3, 4-ethylenedioxythiophene) poly(styrenesulfonate) to excite Lamb waves within the film. Lamb waves are measured both electronically, using a second IDT, and mapped directly using a scanning laser Doppler vibrometer. Pulsed wave excitation is utilized to isolate the weak acoustic signal from the electromagnetic crosstalk, enabling the measurement of relative changes in the resonant frequency, Δf/f
₀
, in response to added mass, Δm, to the sensing area. A gravimetric mass sensitivity equivalent to Δf/(f
₀
Δm)=-153 cm
²
/g is measured by mass loading the sensor with printed polymer layers. It is found that the low stiffness of the substrate contributes significantly to the response of the sensor, yielding a measured overall sensitivity of Δf/(f
₀
Δm)=-83 cm
²
/g.