Network Interactions and Performance of a Multifunction IEC 61850 Process Bus

New substation technology, such as nonconventional instrument transformers, and a need to reduce design and construction costs are driving the adoption of Ethernet-based digital process bus networks for high-voltage substations. Protection and control applications can share a process bus, making more efficient use of the network infrastructure. This paper classifies and defines performance requirements for the protocols used in a process bus on the basis of application. These include Generic Object Oriented Substation Event, Simple Network Management Protocol, and Sampled Values (SVs). A method, based on the Multiple Spanning Tree Protocol (MSTP) and virtual local area networks, is presented that separates management and monitoring traffic from the rest of the process bus. A quantitative investigation of the interaction between various protocols used in a process bus is described. These tests also validate the effectiveness of the MSTP-based traffic segregation method. While this paper focuses on a substation automation network, the results are applicable to other real-time industrial networks that implement multiple protocols. High-volume SV data and time-critical circuit breaker tripping commands do not interact on a full-duplex switched Ethernet network, even under very high network load conditions. This enables an efficient digital network to replace a large number of conventional analog connections between control rooms and high-voltage switchyards.