Simplified phase noise model for negative-resistance oscillators and a comparison with feedback oscillator models

This paper describes a greatly simplified model for the prediction of phase noise in oscillators which use a negative resistance as the active element. It is based on a simple circuit consisting of the parallel addition of a noise current, a negative admittance/resistance, and a parallel (Q-limited) resonant circuit. The transfer function is calculated as a forward trans-resistance (V
_OUT
/I
_IN
) and then converted to power. The effect of limiting is incorporated by assuming that the phase noise element of the noise floor is kT/2, i.e., -177 dBm/Hz at room temperature. The result is the same as more complex analyses, but enables a simple, clear insight into the operation of oscillators. The phase noise for a given power in the resonator appears to be lower than in feedback oscillators. The reasons for this are explained. Simulation and experimental results are included.