A count rate model for PET and its application to an LSO HR PLUS scanner

Considering a standard 20/spl times/20 cm phantom in the field-of-view of a cylindrical, septaless tomograph, the count rate model computes the acceptance to prompt and random events from simple geometric considerations. Dead time factors at all stages of a typical event acquisition architecture are calculated from specified processing clock cycles. Validations of the model's predictions against the measured performances of the ECAT-953B and the EXACT HR PLUS are presented. The model is then used to investigate the benefit of using detectors made of LSO in the EXACT HR PLUS scanner geometry. The results indicate that in replacing BGO by the faster LSO, one can count on an increase of the peak noise-equivalent-count rate by a factor 2.2. This gain will be achieved by using a 5 nsec coincidence window, buckets operating on a 128 nsec clock cycle, and a front-end data acquisition that can sustain a total event rate of 2.9 MHz.