$Ka$-Band Low-Loss and High-Isolation Switch Design in 0.13-$\mu{\hbox {m}}$ CMOS

This paper presents designs and measurements of Ka-band single-pole single-throw (SPST) and single-pole double-throw (SPDT) 0.13-CMOS switches. Designs based on series and shunt switches on low and high substrate resistance networks are presented. It is found that the shunt switch and the series switch with a high substrate resistance network have a lower insertion loss than a standard designs. The shunt SPST switch shows an insertion loss of 1.0 dB and an isolation of 26 dB at >35 GHz. The series SPDT switch with a high substrate resistance network shows excellent performance with 2.2-dB insertion loss and isolation at 35 GHz, and this is achieved using two parallel resonant networks. The series-shunt SPDT switch using deep n-well nMOS transistors for a high substrate resistance network results in an insertion loss and isolation of 2.6 and 27 dB, respectively, at 35 GHz. For series switches, the input 1-dB compression point (1P
₁
) can be significantly increased to with the use of a high substrate resistance design. In contrast, of shunt switches is limited by the self-biasing effect to 12 dBm independent of the substrate resistance network. The paper shows that, with good design, several 0.13- CMOS designs can be used for state-of-the-art switches at 26-40 GHz.