Partial Discharge Pulse Propagation in Shielded Power Cable and Implications for Detection Sensitivity

Boggs and Stone (1982) defined the fundamental limits to the electrical detection of corona and partial discharge (PD), i.e., wideband detection of a PD-induced pulse in the presence of thermal noise. This paper treated the effect of frequency-dependent attenuation in shielded power cable in that context. However, most of the plots in that paper were the result of numerical computations. In the same year, Stone and Boggs set out a theory for high-frequency attenuation of shielded power cable. They showed good agreement between attenuation predicted from measured material properties and measured, high-frequency attenuation of shielded power cable. Since 1982, measurements of high-frequency cable attenuation have been reported by a number of authors for a variety of cables. In addition, software tools have become available that facilitate an analytic solution for the parameters of interest. This article summarizes the theory for PD propagation in shielded power cable for both symmetric (Gaussian) and asymmetric PD-pulse waveforms, based on the assumption that the attenuation constant (dB/m or Nepers/m) of the cable is proportional to frequency. This appears to be the most complete possible analytic exposition of PD attenuation in shielded-power cable, which has obvious applications to field PD measurements of such cable.