Profiling a reactor component using ultrasonics

Nuclear reactors have many components within the reactor vessel. During the life of a reactor it is possible for these components to be displaced or deformed because of the thermal cycles to which they are subject. Also, these components are handled during refuellings and reconfigurations of the core. During these operations, damage is possible. Inspection of these components in situ therefore becomes important for the upkeep of the reactor. However, high radiation levels make it difficult to monitor using optical methods. This paper describes an ultrasonic method which was successfully employed in profiling a deformed guide tube of a reactor. The method uses the well-known ultrasonic ranging technique. However, the speciality of the method is the use of air transducers at 40 kHz to overcome the inherent divergence problems and the difficulties associated with high temperatures inherent in a sodium cooled reactor.<
>