Metal strip reflectivity and NSPUDT orientations in langanite, langasite, and gallium phosphate

New materials of the trigonal 32 class have received much attention recently, due to their quartz-like temperature behavior and the promise of higher electromechanical coupling coefficients. The magnitude and phase of the reflection coefficient of the metal strips that form the SAW transducers and reflector structures is a critical parameter that allows proper device designs and optimal material surface orientation. This paper describes an investigation of the magnitude and phase of the SAW metal strip reflectivity in some new materials and along now orientations. The materials are langanite, langasite, and gallium phosphate. The results are presented as contour plots of the magnitude and phase of the reflection coefficient. In addition, the phase velocity, temperature coefficient of delay, electromechanical coupling coefficient, and power flow angle are given, thus allowing proper orientation selection for SAW device designs. The results presented highlight the reflection coefficient calculations in the selection of natural single-phase unidirectional transducer orientations (NSPUDT) for these new materials. The orientation regions suggested in this paper for the new materials are thus very promising for low-loss, high-performance consumer and communications SAW designs, such as NSPUDT filters, resonator-based filters, and other devices that can benefit from a high metal strip reflectivity.