This paper reports a digital phase locked loop (D-PLL) based frequency locking technique for high frequency hysteretic controlled dc-dc buck converters. The proposed converter achieves constant operating frequency over a wide output voltage range, eliminating the dependence of switching frequency on duty cycle or voltage conversion range. The D-PLL is programmable over a wide range of parameters and can be synchronized to a clock reference to ensure proper frequency lock and switching operation outside undesirable power supply resonance bands. The stability and loop dynamics of the proposed converter is analyzed using an analog equivalent PLL behavioral model which describes the dc-dc converter as a voltage-controlled oscillator (VCO). We demonstrate a 90-240 MHz single phase converter with fast hysteretic control and output conversion range of 33%-80%. The converter achieves an efficiency of 80% at 180 MHz, a load response of 40 ns for a 120 mA current step and a peak-to-peak ripple less than 25 mV. The circuit was implemented in 130 nm digital CMOS process.