Skip to Main Content
| Create Account
| Sign In
Your organization might have access to this article on the publisher's site. To check,
click on this link:http://dx.doi.org/+10.1063/1.1305926
The interaction of α-Al2O3 (0001) surfaces with H atoms and N atoms from remote rf plasmas used for the cleaning and nitridation processes, respectively, is investigated at temperatures in the range of 200–600 °C. The chemistry and kinetics of the above processes are monitored in real time by in situ spectroscopic ellipsometry. Also, the chemistry of the nitrided sapphire surfaces is verified by x-ray photoelectron spectroscopy (XPS) analysis. Specifically, H atoms treatments are effective in removing carbon contaminants from the sapphire surface at temperatures of 200–400 °C. Real time ellipsometry is suitable to detect the cleaning end point and to verify the onset of the H-atom diffusion into the sapphire substrate. Remote N2 plasma nitridation at 200 °C is found to yield homogeneous and smooth AlN layers of about 5 Å, after approximately 25 min of nitridation, whereas high nitridation temperatures result in a damaged sapphire surface with AlN protrusions. Both ellipsometric and XPS data show that the sapphire nitridation can be interpreted in the framework of a chemical model, where the formation of NO competes with AlN formation. The chemisorption equilibrium of NO, which strongly depends on surface temperature, is the key factor controlling the nitridation chemistry and kinetics. © 2000 American Institute of Physics.
Journal of Applied Physics
Date of Publication:
A not-for-profit organization, IEEE is the world's largest professional association for the advancement of technology.
© Copyright 2013 IEEE - All rights reserved. Use of this web site signifies your agreement to the terms and conditions.