On Wednesday, July 29th, IEEE Xplore will undergo scheduled maintenance from 7:00-9:00 AM ET (11:00-13:00 UTC). During this time there may be intermittent impact on performance. We apologize for any inconvenience.
Dielectric loss has been used to study moisture absorption-desorption equilibria and kinetics in epoxy-glass composites. Measurements were made at a temperature of 90°C and a frequency of 200 Hz to maximize sensitivity to interfacial or Maxwell-Wagner polarization. Exposure to various partial pressures of moisture at that temperature permitted a kinetics analysis from which an estimate was made of the diffusivity of water in the composites. Values of dielectric loss at saturation were used to establish a moisture/dielectric loss calibration at 90°C which can be used to estimate the macroscopic internal moisture content of coupon samples and printed circuit cards and boards. Dielectric loss measurements offer promise as a screening technique for resin-glass coupler development.
Note: The Institute of Electrical and Electronics Engineers, Incorporated is distributing this Article with permission of the International Business Machines Corporation (IBM) who is the exclusive owner. The recipient of this Article may not assign, sublicense, lease, rent or otherwise transfer, reproduce, prepare derivative works, publicly display or perform, or distribute the Article.