A New Evaluation Method of Contact Area at Interface Between Pulsed Surface Discharge and Water

The authors propose a new method for evaluating the contact area of a surface discharge on water by analyzing the resistance of water solution. This method supplements optical observations of light emissions and the Schlieren method. The contact area was modeled as a disk electrode, and the theoretical resistance of water was calculated under the assumption of a mutual similarity between the current and electrostatic fields. A simulated electrostatic field was calculated using a common charge-simulation method. The experimental values of the resistance of water were obtained by dividing the measured voltage drop at water by the measured current. The contact area evaluation was performed by comparing the experimental and theoretical resistance values. The contact area increases with increasing the applied voltage and is practically independent of water depth.