Dual-Comparison One-Cycle Control for Single-Phase Bidirectional Power Converters

Dual-comparison one-cycle control for the bidirectional power flow in single-phase grid-connected converters is proposed in this paper. Advantages of dual-comparison one-cycle control when compared to conventional one-cycle control is that it does not give any steady-state dc offset, no light-load instability, and implements unipolar pulsewidth modulation without having to sense the grid voltage. Addition of a fictitious current term, which is generated from the gating signal of one of the active devices, using a bandpass filter, enables the bidirectional power flow. The quality factor of the bandpass filter is shown to impact the total harmonic distortion in current, fundamental displacement angle, and steady-state dc offset. The optimal value of a quality factor, obtained with aid of simulations, gives a superior performance. The current drawn or injected into the grid is seen to lag the grid voltage. The reason for a nonunity displacement power factor is analyzed and a compensation to achieve a unity displacement power factor is also proposed in this paper. Detailed simulation and experimental studies are carried out to validate the proposed control and the high performance that can be obtained.