Spatial Resolution and Blurring Artifacts in Digital X-ray Tomosynthesis

Digital tomosynthesis (DTS) is an X-ray imaging technique that produces cross-sectional images with a scanning motion in narrow angular ranges. This method is promising for the inspection of internal defects in thin slab objects, such as printed circuit boards. However, this limited angular scan approach can have limited resolution in the depth direction. In addition, it can cause ghosting artifacts that originate from other planes in the reconstructed plane. In this paper, we characterized the imaging performance of a DTS method that uses the filtered backprojection for reconstruction. Various imaging parameters were examined, such as the total scan angle and the number of projections used for the reconstruction. We analyzed the signal and noise characteristics of the reconstructed images obtained for a thin tungsten wire and a thin aluminum disc. We obtained in-plane and in-depth modulation transfer functions (MTFs) from the reconstructed wire response images. From the reconstructed disc response images, we calculated the signal difference between the disc region and the adjacent background region along the depth direction, which is called the artifact spread function (ASF). A narrow angular scan enhances the in-plane MTF performance compared to that obtained from the conventional computed tomography, but it degrades the in-depth MTF performance (i.e., it decreases the depth resolution). In addition, the narrow angular scan degrades the ASF performance and causes severe out-of-plane blur artifacts. The optimal scanning angular range is, therefore, required to obtain tomographic images with high spatial resolution and less blur artifacts. The analysis method performed in this paper could be useful for this optimization.