Influence of Axial Magnetic Field on Cathode Plasma Jets in High-Current Vaccum Arc

The cathode plasma jets in vacuum arc and the effect of magnetic field on them have been studied for several years and these studies are helpful to understand the arc characteristics and improve the controlling effect of magnetic field on arc plasma. In this paper, the experiments of the cup-shaped axial magnetic field (AMF) contacts were conducted in which a Helmholtz coil was introduced to generate different external imposed AMFs. It was found that the appearance of arc plasma was changed by variation of the external imposed AMF. If the composite AMF in arc column increased gradually, the obvious individual cathode plasma jets were detected, the arc constriction decreased, and the arc stability increased. Meanwhile, the inclination of cathode plasma jets was observed and the inclination direction was found to be consistent with the magnetic field vector direction which is closely related to the composite AMF. By variation of the external imposed AMF and its direction, the inclination direction of cathode plasma jets also changed. The criterion to detect obvious cathode jets in arc column is obtained that at the contact peripheral where R> 80.5% R
₀
(R
₀
is the contact radius), the AMF strength is no less than 4.5 mT/kA. It was also found that if the composite AMF in interelectrode gap points to different directions at a certain moment, it may lead to the transfer of arc column from the center to the edge of the interelectrode region and the arc instability until when the composite AMF in the interelectrode gap points to the same direction. It can be concluded that the appearance of individual cathode plasma jets can be manipulated by the variation of AMF, which is helpful to study the interaction between arc plasma and electrodes, especially the anode, and improve the interruption performance at higher current.