A 2.5 GHz Low Power, High- ${Q}$ , Reliable Design of Active Bandpass Filter

In this paper, a variation-aware and reliable design of a fully integrated radio frequency (RF) bandpass filter realized using a voltage differencing transconductance amplifier is presented. The filter is characterized by its high frequency operation, low power consumption, high quality factor, and it is insensitive to process, voltage, and temperature variations. Sensitivity analysis has been performed to analyze the circuit performance in the presence of parasitics. The inductor-less approach finds its application in integrated building blocks of RF front ends, thus eliminating the requirement of off-chip filters in transceivers. Centered at 2.511 GHz and operating within the 36.21 MHz 3-dB bandwidth, the filter draws 0.168 mA from a ±1 V power supply, attains a voltage gain of 72.6 dB, a quality factor of 69.34 and noise figure of ~29.6 dB. In addition, it has a dynamic range of 125.84 dB-Hz and a 1-dB compression of -1.5 dBm which translates into a figure of merit as high as 94 dB.