Hybrid MPGD-based detectors of single photons for the upgrade of COMPASS RICH-1

A seven year-long R&D programme has been performed and the resulting detector architecture is a hybrid MPGD including two THick GEM (THGEM) multiplication stages followed a MICROMEGAS. The first THGEM board forms the photocathode support: its upper face is CsI coated. The properties of THGEM-based photocathodes have been studied in details. The two THGEM layers act as pre-amplification stages and, thanks to a staggered configuration, namely by the misalignment of the holes of the two THGEMs, the electron shower produced in the pre-amplification phase is distributed onto a larger surface portion of the following MICROMEGAS unit, where the final multiplication takes place: it is so possible to operate at gains as high as 10
⁵
and more even in radioactive environments. COMPASS RICH-1 is a large-size Cherenkov imaging counter with gaseous radiator for hadron identification up to 50 GeV/c. The construction of a set of large-size (unit size: 60×60 cm
²
) gaseous photon detectors based on the hybrid MPGD architecture for the upgrade of COMPASS RICH-1 is ongoing and the upgraded detector will be in operation in 2016. The R&D studies, the engineering aspects and the construction challenges are presented.