Electric field distribution in oil-pressboard insulation under AC-DC combined voltages

Converter transformers use oil-pressboard as their main dielectric medium and are operated mainly in AC-DC combined electric field. For oil-pressboard insulation, the electric field under DC voltage shows distinctive characteristics from that in AC electric field. Compared to conventional AC power transformers, the electric filed distribution in the converter transformers is much more complicated and remains a big challenge for optimization of insulation design. Existing simulation research in this field falls short of experimental verification and shows limitations in the insulation design of the converter transformers. This paper attempts to fill the gap by measuring the dynamic process and distribution of electric filed in oil-pressboard insulation under the combined field so as to provide reference for insulation design. With the established Kerr-effect electric field measurement platform, the present paper recorded the dynamic process and distribution of AC and DC electric fields at different AC/DC ratios for the double-layer overlapping oil-pressboard insulation model. The research results indicate that 1) the AC electric field distribution in oil is homogeneous and symmetric. The field strengths form linear relation with the amplitudes of applied voltages; 2) the DC electric field distribution in oil is heterogeneous and asymmetric. Under the application of positive DC voltage, the field strength around the upper electrode is much smaller than that of the lower one. The DC electric field strength shows no linear growth with the increase of the applied voltages; 3) the accumulation of interface charges forms the major cause resulting in the asymmetric distribution of the DC electric field at different positions of the insulation. The research results imply that although RC model is recognized as effective simulation method for insulation design of conventional transformers, it shows its limitations and should be enriched and adjusted according to the electric field distribution under AC-DC combined voltage and taking into full consideration of the accumulation of interface charges.