Nanosecond Pulse Generator Based on an Unbalanced Blumlein-Type Multilayered Microstrip Transmission Line and Solid-State Switches

This paper combines an unbalanced Blumleintype multilayered microstrip transmission line with solid-state switches to develop a high-voltage nanosecond pulse generator. This study was performed to emphasize the importance of a compact nanosecond pulse generator for biomedical applications. The unbalanced Blumlein-type transmission line reduces current flow through the solid-state switches. A multilayered microstrip transmission line is stacked onto the four-layered printed circuit board to minimize the system volume. Voltage wave propagation analysis is used to explain the principle of the system, which produced a rectangular pulse. The strategy to produce different pulse widths and the controlled timing of the related solid-state switches is interpreted according to this analysis, highlighting the approach needed to achieve a 50-100 ns pulsewidth. Also, the relevant principle of the variable load impedance of the unbalanced Blumlein-type multilayered microstrip transmission line system is also analyzed. To demonstrate the performance of the generator, a miniaturized system is established. Eventually, the nanosecond pulse generator produces a rectangular pulse on a resistor load of 50 Ω, with amplitude of 0-2 kV, pulsewidth of 50-100 ns, rise time of approximately 20 ns, and repetition frequency of 0 to several kilohertz. Also, when a 500 Ω resistor is used instead of a 50 Ω resistor, the output of the nanosecond pulse voltage is approximately two times that of the applied charging voltage.