Current Injection-Based Online Parameter and VSI Nonlinearity Estimation for PMSM Drives Using Current and Voltage DC Components

To develop a high-performance and reliable permanent-magnet synchronous machine (PMSM) drive for electric vehicle (EV) applications, accurate knowledge of the PMSM parameters is of significance. This paper investigates online estimation of PMSM parameters and voltage source inverter (VSI) nonlinearity using current injection method in which magnetic saturation is also considered. First, a novel dc component-based current injection model considering VSI nonlinearity is proposed, which employs the dc components of
dq
-axis currents and voltages for PMSM parameter and VSI-distorted voltage estimation. This method can eliminate the influence of rotor position error on VSI nonlinearity estimation. Second, a simplified linear equation is employed to model the cross- and self-saturation of the
dq
-axis inductances during current injection, which can facilitate the estimation of the inductance variations induced by magnetic saturation. Third, a novel current compensation strategy is proposed to minimize the torque ripples caused by current injection, which contributes to making our approach applicable to both surface and interior PMSMs. Therefore, the proposed online parameter estimation approach can estimate the winding resistance, rotor flux, VSI-distorted voltage, and the varying
dq
-axis inductances under different operating conditions. The proposed approach is experimentally validated on a down-scaled laboratory interior PMSM prototyped for direct-drive EV powertrain.