Analysis of thermally aged insulation paper in a natural ester-based dielectric fluid

The compatibility of a newly developed ester fluid (PKOAE) with cellulose insulation paper is evaluated by performing thermal ageing of Kraft paper in the new ester fluid. Thermally accelerated ageing was performed in sealed mild steel pressure vessel containing ageing catalysts, thermally upgraded insulation paper, and dielectric fluid (mineral oil and palm kernel oil alkyl ester) at 150°C for 28, 56, and 84 days. Under the same illumination, the color level of ester aged paper samples decreased by 33% after 84 days of ageing as compared with the color level of aged mineral oil impregnated paper samples which decreased by 73% within the same time. Whilst the samples of PKOAE impregnated paper exhibited approximately 5% reduction in tensile strength after 28 days of ageing, the kraft paper samples closer to copper strips were found to have a significant faster degradation rate. The tensile strength of paper samples closer to copper plates dropped to about 35% of the tensile strength of the unaged sample after ageing for 28 days, and the paper layers farther away from the copper plates decreased by about 10%. The mechanisms that could be responsible for the slower ageing rate of kraft paper in PKOAE fluid are discussed. The characteristic breakdown strength of PKOAE impregnated paper is on the average, 42% better than mineral oil impregnated paper. The high breakdown strength of PKOAE fluid may be responsible for the higher breakdown field of ester-paper system since the applied electrical stress is shared by the oil-paper combination.