Characterizing fire danger from low-power photovoltaic arc-faults

While arc-faults are rare in photovoltaic installations, more than a dozen documented arc-faults have led to fires and resulted in significant damage to the PV system and surrounding structures. In the United States, National Electrical Code
^®
(NEC) 690.11 requires a listed arc fault protection device on new PV systems. In order to list new arc-fault circuit interrupters (AFCIs), Underwriters Laboratories created the certification outline of investigation UL 1699B. The outline only requires AFCI devices to be tested at arc powers between 300-900 W; however, arcs of much less power are capable of creating fires in PV systems. In this work we investigate the characteristics of low power (100-300 W) arc-faults to determine the potential for fires, appropriate AFCI trip times, and the characteristics of the pyrolyzation process. This analysis was performed with experimental tests of arc-faults in close proximity to three polymer materials common in PV systems, e.g., polycarbonate, PET, and nylon 6,6. Two polymer geometries were tested to vary the presence of oxygen in the DC arc plasma. The samples were also exposed to arcs generated with different material geometries, arc power levels, and discharge times to identify ignition times. To better understand the burn characteristics of different polymers in PV systems, thermal decomposition of the sheath materials was performed using infrared spectra analysis. Overall a trip time of less than 2 seconds is recommended for the suppression of fire ignition during arc-fault events.