A 1mV voltage ripple 0.97mm2 fully integrated low-power hybrid buck converter

The output voltage ripple is one of the most significant system parameters in switch-mode power supplies. This ripple degrades the performance of application specific integrated circuits (ASICs). The most common way to reduce it is to use additional integrated low drop-out regulators (LDO) on the ASIC. This technique usually suffers from high system efficiency as it is required for portable electronic systems. It also increases the design challenges of on-chip power management circuits and area required for the LDOs. This work presents a low-power fully integrated 0.97mm
²
DC-DC Buck converter with a tuned series LDO with 1mV voltage ripple in a 0.25μm BiCMOS process. The converter prodives a power supply rejection ratio of more than 60 dB from 1 to 6MHz and a load current range of 0...400 mA. A peak efficiency of 93.7% has been measured. For high light load efficiency, automatic mode operation is implemented. To decrease the form factor and costs, the external components count has been reduced to a single inductor of 1 μH and two external capacitors of 2 μF each.