Compact Topside Millimeter-Wave Waveguide-to-Microstrip Transitions

This letter presents two different waveguide-to-microstrip transition designs for the 76-81 GHz frequency band. Both transitions are fabricated on a grounded single layer substrate using a standard printed circuit board (PCB) fabrication process. A coplanar patch antenna and a feed technique at the non-radiating edge are used for the impedance transformation. In the first design, a conventional WR-10 waveguide is connected. In the second design, a WR-10 waveguide flange with an additional inductive waveguide iris is employed to improve the bandwidth. Both designs were developed for the integration of multi-channel array systems allowing an element spacing of λ
₀
/2 or less. Measurement results of the first transition without the iris show a bandwidth of 8.5 GHz (11%) for 10 dB return loss and a minimum insertion loss (IL) of 0.35 dB. The transition using the iris increases the bandwidth to 12 GHz (15%) for 10 dB return loss and shows a minimum insertion loss of 0.6 dB at 77 GHz.