10b 150MS/s 0.4mm2 45nm CMOS ADC based on process-insensitive amplifiers

A 10b 150MS/s 0.4mm
²
pipeline ADC is implemented in a 45nm CMOS process. The input SHA, employing four charge-redistributed capacitors, converts single-ended or differential input signals of 1.2Vpp to differential outputs of 0.8Vpp for a low supply voltage of 1.1V. The process-insensitive high-gain amplifiers in the SHA and MDACs are based on gain-boosting, pseudo-differential output pair, and continuous-time common-mode feedback circuits to overcome various performance limitations that are observed in deep nanometer CMOS technologies. The MDAC2 and MDAC3 share a single high-gain amplifier to reduce the input memory effect, chip area, and power dissipation. The measured DNL and INL are within 1.06 and 1.29LSB, respectively. At 150MS/s, the prototype ADC shows a maximum SNDR of 51.8dB and a maximum SFDR of 63.7dB with a 1.2Vpp sinusoidal input and consumes 47.3mW.