Photovoltaic DC Arc Fault Detector testing at Sandia National Laboratories

The 2011 National Electrical Code® (NEC®) added Article 690.11 that requires photovoltaic (PV) systems on or penetrating a building to include a listed DC arc fault protection device. To fill this new market, manufacturers are developing new Arc Fault Circuit Interrupters (AFCIs). Comprehensive and challenging testing has been conducted using a wide range of PV technologies, system topologies, loads and noise sources. The Distributed Energy Technologies Laboratory (DETL) at Sandia National Laboratories (SNL) has used multiple reconfigurable arrays with a variety of module technologies, inverters, and balance of system (BOS) components to characterize new Photovoltaic (PV) DC AFCIs and Arc Fault Detectors (AFDs). The device's detection capabilities, characteristics and nuisance tripping avoidance were the primary purpose of the testing. SNL and Eaton Corporation collaborated to test an Eaton AFD prototype and quantify arc noise for a wide range of PV array configurations and the system responses. The tests were conducted by generating controlled, series PV arc faults between PV modules. Arc fault detection studies were performed on systems using aged modules, positive- and negative-grounded arrays, DC/DC converters, 3-phase inverters, and on strings with branch connectors. The tests were conducted to determine if nuisance trips would occur in systems using electrically noisy inverters, with series arc faults on parallel strings, and in systems with inverters performing anti-islanding and maximum power point tracking (MPPT) algorithms. The tests reported herein used the arc fault detection device to indicate when the trip signal was sent to the circuit interrupter. Results show significant noise is injected into the array from the inverter but AFCI functionality of the device was generally stable. The relative locations of the arc fault and detector had little influence on arc fault detection. Lastly, detection of certain frequency bands successfully differentiated normal operational noise from an arc fault signal.