Notice of Violation of IEEE Publication Principles: The Design and Implementation of Time Synchronization for CNC Systems Based on Switched Ethernet

Notice of Violation of IEEE Publication Principles

"The Design and Implementation of Time Synchronization for CNC Systems Based on Switched Ethernet"
by Ding Shaochun, Wan Haibo, Zhang Qiaobin
in the 2010 International Conference on Information Management, Innovation Management and Industrial Engineering (ICIII), Vol. 4, November 2010, pp. 445-450

After careful and considered review of the content and authorship of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE's Publication Principles.

This paper is a duplication of the original text from the paper cited below. The original text was copied without attribution (including appropriate references to the original author(s) and/or paper title) and without permission.

Due to the nature of this violation, reasonable effort should be made to remove all past references to this paper, and future references should be made to the following article:

"The Design and Implementation of Time Synchronization for CNC Systems Based on Switched Ethernet"
by Haibo Yang, Hu Lin, Yaodong Tao, Jin Li
in the 2010 2nd International Conference on Advanced Computer Control (ICACC), Vol. 2, March 2010, pp. 283-287


The method of reconstructing acceleration field was studied based on inversion of frequency response function matrix. In the method, the frequency response function (FRF) matrix was obtained. The vibration test was carried out and the test object was an underwater vehicle power-cabin. The results of theory study and test showed that the calculated precision by this method can satisfy the needs of the engineering application.