Quench Characteristics of bi2212 Solenoid Insert Coils in Background Field up to 20 T

The use of wind and react bi2212 wire for high field ( >;20 T) insert coils has been demonstrated to be a promising technology. While cryogenic stability and quench propagation are fundamental issues for the design and safe operation of superconducting magnets there is little data for the high field application. The present work shows data from systematic quench measurements at 4.2 K on two 6-layer 300 mm high bi2212 solenoid coils at different currents I between 50% and 95% of
I
_C
in different background fields of 15, 18 and 20 T from a wide bore compact NbTi-Nb3Sn magnet developed by Oxford Instruments. The quench was induced by localized heat pulses (20-100 ms) and recorded with temporal-spatial resolved voltage taps and thermometers. By precise control of the power delivered in the heat pulse, the minimum quench energy MQE and the time constant for the quasi-stationary minimum propagation zone MPZ was obtained for each test condition. MQE was found to follow a scaling law of
I
_C
²
/
I
⁴
in three different coils. The MPZ exhibited the expected anisotropy, extending predominately in the tangential direction and confined in a single winding layer. The propagation was also predominantly along the winding layer with a relatively slow velocity less than 50 cm/s, with an even lower radial propagation velocity of ~ 3 mm/s. In the present study, the interplay between the HTS coils and with the LTS background field were also measured and the results are highly relevant to the design of 20 T plus high field magnets with integrated LTS and HTS coils. The results were analysed in the context of a wide current temperature range for current sharing in the bi2212 wire and the
T
³
dependence of heat capacity at low temperatures.