Estimation of bottom scattering strength from measured and modeled mid-frequency sonar reverberation levels

Hamilton-type geoacoustic models were developed for Area Foxtrot, a shallow water test bed south of Long Island, for emerging active sonar systems where the surface sediment type is highly spatially variable. Reverberation levels (RL) were modeled using the finite-element parabolic equation (FEPE) propagation model to augment the generic sonar model (GSM) propagation model because the bottom loss model in GSM did not estimate transmission loss (TL) accurately in shallow water. FEPE estimates reveal that there is a greater than 15 dB difference between TL for sand and that for silt-day sediments in Area Foxtrot. The comparison between modeled RL and measured RL (from a 1991 active sonar exercise) enabled bottom scattering strength kernels to be developed for Area Foxtrot. Bottom scattering strength was found to be a function of sediment type. Hard sand sediment has a bottom scattering strength which obeys Lambert's law (sin/sup 2/ /spl theta/) while that of silt-clay sediment is consistent with sub-bottom volume scattering (sine). The RLs in Area Foxtrot are azimuth-dependent and are a function of TL and bottom scattering strength (and hence bottom sediment type). Sonar beams steered towards the hard sand show higher RLs than for silt-clay, and knowledge of the sediment type and its spatial variation must be known to model RL accurately. A method to determine sediment type using measured RLs and RL slopes is given.