Challenges for extra large embedded wafer level ball grid array development

Fan-out embedded wafer level ball grid array (eWLB) is a very promising packaging technology with many advantages in comparison to standard ball grid array packages and leadframe based packages because of smaller size, better electrical and thermal performance, higher package interconnect density and system integration possibilities at low packaging cost. It was successfully developed for medium and large-size package. However, there is strong need to develop extra large eWLB for system integration. Compared with large eWLB, there are many challenges for extra large eWLB development. Wafer or panel level warpage, package level reliability, and board level reliability are ones of the most challenging issues. In this paper, finite element modeling was used to create design rules and optimize test vehicles based on the correlation done for medium, large-size eWLB. Two test vehicles were identified for process development and reliability test. Recent progress in the extra large eWLB development is introduced in this paper, the results show that the design rule and process capability are reliable and ready for extra large molded embedded wafer level package for system integration needs.