An efficient active ripple filter for use in DC-DC conversion

When low ripple is required from a switched mode dc-dc converter, dissipative active filters offer an alternative to passive LC and coupled inductor filters. Analytical and experimental results are presented for a simple active ripple filter. The filter employs a pair of current transformers as sensors for feedforward and feedback control and two metal-oxide-semiconductor field-effect transistors (MOSFETs) as cancellation current drivers. Measurements demonstrate good ripple attenuation up to 5 MHz, more than 70 dB being obtained at 100 kHz, the switching frequency of a test converter. The overall efficiency was measured as 95%, with room for further improvement. The filter is suitable for input and output smoothing in dc-dc converters for aerospace and other critical applications.